Comicaze

Blog

Quality Roofing In Charlotte North Carolina

How flat is your roof? The first thing I would consider is re-pitching it so the water actually runs off the roof. What climate do you live in?

For literally flat roofs there is of course “rolled roofing” which is basically very strong rubber. You’d have to take off the metal, replace any boards that have rotted, etc. and put that down.

If it’s possible, re-pitch the roof to at least a 5/12 pitch and you can use inexpensive corrugated metal (about $15 a sheet in my area of the world). Metal should never be put on a roof of 4/12 or less!

Depending on how large your roof is I would definitely consider DIY to save money however, make sure it’s done right or you’ll be wasting money in the long run.

Do You Have Insurance For Your Roof?

By the way, do you have homeowners insurance? I’d check into that if anything was damaged or ruined. It may even pay to have it fixed professionally.

 

Most of the construction work is not at all times pretty easy and simple. It has to have the consultation from experts and contractors if it is a commercial establishment you are planning to put up. But there are other installations that can be done by you alone. Take, for example, installing a Charlotte NC Roofer. Though this may be better left to a roofing specialist, you can still manage to do the work by having a complete set of tools to be used and simply following the procedures.

Call Now For A Free Quote On Your Charlotte Roof

The first step in installing a roofing contractors Charlotte NC is to put lines to trace the alignment of the shingle tops. These shingles will be placed above the lines for nailing. The lines have to be snapped across the roof from eave to peak. Tracing the lines can be done with the use of shingle bottoms or tapes as recommended by manufacturers. When all lay outing is done, the shingles are now ready for installation. It is important to balance every other shingle by 6 inches to prevent from possible leakage when you overlap them and leave about 1/16 inch space between each shingle.

Find more roofing contractors charlotte nc.

Leave a Reply

Your email address will not be published. Required fields are marked *